TSI's
UDC-2458 is an outdoor, TDD up/down converter to translate popular
2.4GHz spread spectrum signals up to the less crowded 5.8GHz band.
The UDC-2458 also provides amplification to extend wireless coverage
range to over 10 miles.
Together with a standard 802.11b WLAN AP or Bridge, the UDC-2458 can
work in either point-to-point or point-to-multipoint mode. This provides
a wireless ISP the lowest equipment cost yet most efficient time-to-market
operation. No user adjustment, no configuration and no provisioning
is required, the UDC-2458 is the easiest to install among its league.
Features
•
Pole
mounted, 100% weather-proof.
•
Type
N connectors.
•
No
user adjustment needed.
•
Transmitting
power 27dBm (500mW).
•
10
miles operating range.
•
Economic
& easy installation.
Configuration
Specifications
Operating
frequency range
Receiver
gain
Power
consumption
2400~2484MHz
translates to 5728~5812MHz
7
dB
4
watts
Operating
mode
Frequency
response flatness
Operating
temperature
Bi-directional
TDD
B+/-1.5dB
(both 2400~2484MHz and 5728~5812MHz)
-30
~ 60 degrees Celsius
5.8GHz
transmit power P1dB
Noise
figure
Operating
condition
27
dBm ( 250 mW )
<
6 dB
100%
outdoor weather-proof
Transmitter
gain
Switching
time
Dimension
14
dB
<
1 micro-second
170mm x 135mm x 30mm
Transmitter
input power
Connector
Accessories
Min:
3 dBm; Max: 12dBm
50
ohm N-type fem ale (both antenna port & 2.4GHz port)
DC
inserter (included) 110/220VAC power adapter (optional) 23 dBi
planar antenna (optional)
Note:
Typical
values @ 25 degree Celsius.
Technical specifications are subject to change without prior
notice. Rev.
030704
